膜
静电纺丝
聚偏氟乙烯
化学工程
离子交换
高分子化学
马来酸酐
苯乙烯
选择性
化学
材料科学
纳米纤维
聚合物
共聚物
有机化学
离子
生物化学
工程类
催化作用
作者
Jianlong Ye,Xushan Wang,Jiachen Chu,Dongxue Yao,Yufeng Zhang,Jianqiang Meng
标识
DOI:10.1016/j.apsusc.2019.04.106
摘要
The traditional methods to introduce multi-functional groups onto the surface of membrane require unpleasant reaction conditions and complex procedures. Motivated by the need of an economical purification method in the downstream processing of therapic proteins, we develop a simple approach to fabricate mixed mode membrane adsorbers. Nanofibrous membrane support was fabricated by electrospinning a blend of poly(styrene-co-maleic anhydride) (SMA) with polyvinylidene fluoride (PVDF). Mixed mode ligands were then immobilized on the membrane through the conversion of anhydride moieties by aminolysis with functional amines, n-butylamine (BAE), n-octylamine(OAE), N-methyl-d-glumine(NMG). The obtained mixed-mode membrane adsorbers, PVDFS-g-BAE, PVDFS-g-OAE, and PVDFS-g-NMG, which contain hydrophobic interaction/ion exchange, reverse phase interaction/ion exchange, and hydrophilic interaction/ion exchange interactions respectively, were used for protein separation. The success of modification was supported by FTIR and XPS, indirectly confirmed by WCA measurements. Static protein binding property was measured with several model proteins. The PVDFS-g-BAE membrane showed a capacity of 120 mg/mL for IgG and fair selectivity over BSA or Lym; The PVDFS-g-OAE membrane showed a capacity of 140 mg/mL for ɑ-CTP and high selectivity over CYT-C. In addition, the nanofibrous membrane has large total pore area, high porosity, and good mechanical property, which is sufficient for the demands of practical use.
科研通智能强力驱动
Strongly Powered by AbleSci AI