材料科学
基质(水族馆)
芯(光纤)
复合材料
光电子学
沉积(地质)
开发(拓扑)
过程(计算)
联轴节(管道)
焊接
作者
Jun Yoshiike,Masahiro Sunohara,Gai Kadoishi,Yoko Nakabayashi,Noriyoshi Shimizu,Ryuichi Matsuki
出处
期刊:
日期:2026-04-14
卷期号:: 239-240
被引量:1
标识
DOI:10.23919/icep-hbs69241.2026.11550498
摘要
Glass core substrates exhibit significantly higher rigidity than conventional organic substrates and are therefore regarded as promising core materials for next-generation build-up packages. However, a major challenge lies in the occurrence of SeWaRe defects, which arise from thermal stresses induced by the mismatch in the coefficients of thermal expansion (CTE) between the glass core and the build-up resin.To mitigate this issue, we proposed a structure in which the corner regions of each individual piece are formed from resin. Specifically, cross-shaped holes were fabricated during the through-glass via (TGV) formation process, and these holes were subsequently filled with resin during the build-up process to realize the proposed structure.However, considering the thermal history during chip mounting, it became evident that the suppression effect was insufficient. Therefore, an edge-protection material was applied to relieve the stress concentrated at the edges of each individual piece. As a result, it was confirmed that SeWaRe defects could be effectively suppressed even under thermal loading.Through these efforts, we successfully developed a glass-core package substrate incorporating 11 layers of single-sided copper wiring (22 layers in total).
科研通智能强力驱动
Strongly Powered by AbleSci AI