光学
功率(物理)
定向天线
物理
菲涅耳区天线
材料科学
反射(计算机编程)
天线(收音机)
带宽(计算)
遥感
宽带
抛物面反射器
缝隙天线
作者
Francesco Lisi,Julien Maurin,Piero Angeletti,Giovanni Toso,Hervé Legay,George Goussetis
标识
DOI:10.1109/tap.2026.3722257
摘要
Array-fed reflectors are widely used for multibeam satellite systems, but their efficiency is often limited by the highly nonuniform power distribution across the feed array. This, in turn, calls for increased back-off in the operation of the high power amplifiers and therefore penalising the payload efficiency. In this work, we propose the use of shaped reflectors as means of mitigating this limitation. We demonstrate that by introducing controlled surface deformations in the paraboloidal surface, it is possible to improve the uniformity of the power distribution across the feed array in a multibeam coverage scenario. The problem is formulated as a multi-objective optimisation balancing average directivity and feed power uniformity. We then propose a dedicated four-stage workflow to efficiently solve this problem: three fast stages using a Fast Fourier Transform (FFT)-based geometrical optics solver, followed by a final refinement with a physical optics solver. Two basis functions, Zernike polynomials and cubic B-splines, are proposed to describe the surface profile, with the former achieving more uniform power distribution using fewer terms. Results demonstrate up to 2.1 dB reduction in high-power amplifier peak-to-peak dynamics with negligible loss in beam gain, providing a practical path toward more efficient multibeam satellite payloads.
科研通智能强力驱动
Strongly Powered by AbleSci AI