预失真
邻道功率比
放大器
多波段设备
材料科学
dBc公司
氮化镓
邻道
宽带
电气工程
晶体管
光电子学
电子工程
工程类
电压
CMOS芯片
图层(电子)
天线(收音机)
复合材料
作者
Ruibin Gao,Jingzhou Pang,Tianfu Cai,Ce Shen,Weimin Shi,Zhijiang Dai,Mingyu Li,Anding Zhu
标识
DOI:10.1109/tmtt.2022.3149379
摘要
This article presents a new method to design dual-band three-way Doherty power amplifiers (DPAs). A novel modified load modulation network (LMN) is constructed for enabling dual-mode Doherty operation with three-way configuration, providing enhanced high efficiency range in both modes. Moreover, a parallel load compensation network (LCN) is employed in the proposed three-way DPA to provide wideband performance in each operation band. A three-way dual-mode DPA using commercial gallium nitride high electron mobility transistors (GaN HEMTs) is then designed and manufactured to verify the proposed architecture. Frequency bands of 1.45-1.9 GHz in Mode I and 0.75-1.0 GHz in Mode II are achieved by the DPA, respectively. The fabricated DPA has a 9-dB output back-off (OBO) efficiency of 42.8%-57.7% and a saturated efficiency of 55.4%-70.1%. When driven by a 20-MHz long term evolution (LTE) modulated signal with 8-dB peak-to-average ratio (PAPR), the adjacent channel power ratio (ACPR) of the fabricated DPA is better than -49.9 dBc after digital predistortion at 0.9 and 1.7 GHz with average efficiency of 45.7% and 54.6%.
科研通智能强力驱动
Strongly Powered by AbleSci AI