Novel magnetic multi-templates molecularly imprinted polymer for selective and rapid removal and detection of alkylphenols in water

A novel multi-templates molecularly imprinted polymer (MIP) was prepared on the surface of mesoporous silica coated magnetic graphene oxide ([email protected]2), and applied for the rapid and selective detection of alkylphenol compounds including bisphenol A (BPA), 4-tert-octylphenol (4-tert-OP) and 4-nonylphenol (4-NP) in water. The synthesized composite was characterized by Fourier transform infrared spectrometer, vibrating sample magnetometer, transmission electron microscopy and Brunauer-Emett-Teller surface area analyzer. The MIP showed high adsorption capacity, good selectivity and fast kinetic for these alkylphenols. The maximum adsorption capacities of the MIP for BPA, 4-tert-OP and 4-NP were 16.81, 35.97 and 61.73 mg g−1, respectively, which were significantly higher than those of the non-molecularly imprinted polymer (NIP) due to the imprinting effect. The adsorption of alkylphenols reached equilibrium within 30 min, and followed pseudo-second-order kinetic model and Langmuir model well. The MIP exhibited good sorption selectivity towards BPA, 4-tert-OP and 4-NP, and could be reused 5 times. Furthermore, a new method for ultrasensitive determination of BPA, 4-tert-OP and 4-NP in water by high performance liquid chromatography was developed, using MIP-based magnetic solid-phase extraction coupled with dispersive liquid-liquid microextraction. Under the optimum conditions, the limits of detection (LODs) for BPA, 4-tert-OP and 4-NP were 0.013, 0.010 and 0.010 μg L−1, respectively. The proposed method was used to the detection of BPA, 4-tert-OP and 4-NP in real water samples, with spiked recoveries of 81.5–104.1% and relative standard deviations (RSDs) of 1.0–7.6%, indicating the multi-templates MIP could be a promising adsorbent for separation and analysis of alkylphenols.