Heat transfer behavior of graphene-based photothermal conversion materials prepared with tube array-porous network composite structure

In order to solve the problems of low energy utilization and poor structural stability of photothermal conversion materials, a graphene-based photothermal conversion material was prepared, which was structurally integrated with a light-absorbing upper layer and a heat insulating base. During the preparation process, a tightly arranged nanotube array upper layer was constructed on the basis of graphene films by microimprinting technology, and a porous aerogel base was molded by a fixed-point titration and multiple-foaming method. The results show that the light trap constructed from graphene hollow nanotubes can significantly increase the number of light reflections and reduce light reflectivity. Meanwhile, the length of the nanotubes is directly proportional to the light-absorbing capacity of the material, which can increase the light-absorbing rate to more than 98% under the embossing conditions of 85 kN and 8h. In addition, the porous aerogel insulation base can effectively improve the photothermal conversion effect, and a photothermal conversion efficiency of 87% and a water evaporation rate of 1.3 kg/(m2 h) can be achieved at a base thickness of 6 mm.