联苯
膜
复合数
离子交换
离子
高分子化学
化学
离子交换膜
材料科学
化学工程
复合材料
有机化学
工程类
生物化学
作者
Alessandro Raffaele Ferrari,Diego Stucchi,Tommaso Caielli,Raziyeh Akbari,Ivan Claudio Pellini,Carlo Antonini,Piercarlo Mustarelli
标识
DOI:10.1016/j.ssi.2025.116996
摘要
The main requirement for the development of Anion Exchange Membranes Fuel Cells (AEMFCs) and Water Electrolyzers (AEMFEs) on an industrial scale is the improvement of Anion Exchange Membranes performance. Besides good ionic conductivity, dimensional stability and mechanical properties in the wet state, the main challenge to be overcome is the improvement of AEMs chemical resistance in harsh alkaline environment. Poly(aryl piperidinium)s are among the most promising AEMs in terms of conductivity, mechanical properties, and chemical stability. Here we report the fabrication and physico-chemical characterization of composite AEMs based on poly(biphenyl piperidinium) (PBP) with the addition of zirconium oxide as a filler to improve membrane properties, including anionic conductivity, water uptake and alkali resistance. The optimal ZrO 2 filler content was found to be 5 wt% of dry polymer mass. Compared to plain PBP, composite membranes exhibit increased hydroxide conductivity (from 75 to 116 mS cm −1 at 80 °C), reduced water uptake (from 427 % to 278 % at 80 °C) and swelling ratio (from 85 to 62 % at 80 °C), and a limited reduction (41 %) of cationic groups after ageing in KOH 1 M for 500 h at 80 °C. We demonstrate that ZrO 2 filler hinders Hoffman elimination reaction on the piperidinium ring.
科研通智能强力驱动
Strongly Powered by AbleSci AI