Biomass-Derived-Carbon-Supported Spinel Cobalt Molybdate as High-Efficiency Electrocatalyst for Oxygen Evolution Reaction

Ananas comosus leaves were converted to a porous graphitized carbon (GPLC) material via a high-temperature pyrolysis method by employing iron salt as a catalyst. A cobalt molybdate (CoMoO4)-and-GPLC composite (CoMoO4/GPLC) was then prepared by engineering CoMoO4 nanorods in situ, grown on GPLC. N2 adsorption–desorption isothermal curves and a pore size distribution curve verify that the proposed composite possesses a porous structure and a large specific surface area, which are favorable for charge and reactant transport and the rapid escape of O2 bubbles. Consequently, the as-synthesized CoMoO4/GPLC shows low overpotentials of 289 mV and 399 mV to afford the current densities of 10 mA cm−2 and 100 mA cm−2 towards the oxygen evolution reaction (OER), which is superior to many CoMoO4-based catalysts in previous studies. In addition, the decrease in current density is particularly small, with a reduction rate of 3.2% after a continuous OER procedure for 30 h, indicating its good stability. The excellent performance of the CoMoO4/GPLC composite proves that the GPLC carrier can obviously impel the catalytic activity of CoMoO4 by improving electrical conductivity, enhancing mass transport and exposing more active sites of the composite. This work provides an effective strategy for the efficient conversion of waste ananas comosus leaves to a biomass-derived-carbon-supported Co-Mo-based OER electrocatalyst with good performance, which may represent a potential approach to the development of new catalysts for OER, as well as the treatment of waste biomass.