Microencapsulated phase change material in 3D-printable mortars

灰浆 相变 相(物质) 相变材料 材料科学 复合材料 化学工程 工程类 化学 工程物理 有机化学
作者
Sahand Rahemipoor,Mohamad Bayat,Masoud Hasany,Mohammad Mehrali,Kristoffer Almdal,Navid Ranjbar,Mehdi Mehrali,Mehdi Mehrali,Mehdi Mehrali
出处
期刊:Energy Conversion and Management [Elsevier BV]
卷期号:321: 119106-119106 被引量:11
标识
DOI:10.1016/j.enconman.2024.119106
摘要

• Adding MEPCM increased the printability, yield stress, and viscosity of mortars. • MEPCM can avoid the further need for additives like viscosity modifier agents. • A printed wall with 80 % sand replaced by MEPCM showed a 40.4 % energy reduction. • MEPCMs showed stability and resistance to the alkaline cementitious environment. • The integration of MEPCM resulted in a retardation effect on the setting time. The present study investigates the potential of replacing sand with microencapsulated phase change materials (MEPCM) in 3D-printable mortar to provide a promising way to improve thermal performance in 3D-printed buildings. Adding MEPCM significantly enhanced the rheological properties and early hardening evolution of cementitious mortar for 3D printing applications without the need for viscosity modifier agents. In hardened mortars, microstructural analysis and thermal cycling experiments confirmed that MEPCM remained intact and stable within the cementitious environment. The thermal properties of the treated mortars, including latent heat and thermal conductivity, were improved for energy-saving applications. Despite this, the compressive strength of the mortars dropped considerably by increasing the concentration of MEPCM while a strength of above 20 MPa was maintained. Simulation results from 3D Finite Element Method (FEM) and 1D reduced order model (ROM) closely matched the experimental data from printed walls in a thermal setup, validating the use of 1D ROM simulations for long-term predictions. In a case study, a printed wall where MEPCM replaced 80 % of the sand showed a ∼40 % reduction in energy consumption compared to mortar without MEPCM under real weather conditions.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
高贵幼枫完成签到 ,获得积分10
1秒前
2秒前
哈哈发布了新的文献求助30
3秒前
3秒前
小yang完成签到,获得积分10
4秒前
5秒前
5秒前
Jasper的应助被ygqchem采纳,获得10
6秒前
tx的应助被ling采纳,获得10
6秒前
7秒前
7秒前
小小菜完成签到 ,获得积分10
7秒前
感动的莞完成签到,获得积分10
7秒前
7秒前
wanghaoan完成签到,获得积分10
7秒前
科研通AI65的应助被makabaka采纳,获得10
8秒前
u711711发布了新的文献求助10
8秒前
illuminate完成签到 ,获得积分10
9秒前
昏睡的柜子完成签到,获得积分10
10秒前
邪恶猪屁完成签到 ,获得积分10
11秒前
11秒前
longer完成签到 ,获得积分10
12秒前
懒羊羊关注了科研通微信公众号
12秒前
拯救小岛发布了新的文献求助10
12秒前
无心的千万完成签到,获得积分10
12秒前
yt发布了新的文献求助30
12秒前
13秒前
13秒前
13秒前
逆旅如行人完成签到,获得积分10
14秒前
乔科利完成签到,获得积分10
14秒前
14秒前
15秒前
TOT完成签到,获得积分10
15秒前
搞怪的老九的应助被369ninja采纳,获得10
15秒前
名都完成签到 ,获得积分10
15秒前
stone完成签到 ,获得积分10
17秒前
传统的复天完成签到,获得积分10
18秒前
喂喂完成签到,获得积分10
18秒前
初景发布了新的文献求助10
19秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Sex, Aging, and Death in a Medieval Medical Compendium: Trinity College Cambridge MS R.14.52, Its Texts, Language, and Scribe 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
基于界面调控的高效湿气发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8190664
求助须知:如何正确求助?哪些是违规求助? 9577768
关于积分的说明 21854688
捐赠科研通 7789790
什么是DOI,文献DOI怎么找? 3436425
关于科研通互助平台的介绍 2560302
邀请新用户注册赠送积分活动 2483169