烧结
放电等离子烧结
陶瓷
抗弯强度
极限抗拉强度
多孔性
断裂(地质)
韧性
作者
Monika Hrubovčáková,Erika Mudra,Radovan Bureš,Alexandra Kovalčíková,Richard Sedlák,Vladimír Girman,Pavol Hvizdoš
标识
DOI:10.1016/j.jeurceramsoc.2020.03.072
摘要
Abstract Conductive Al2O3/graphene composites were manufactured by SPS from Al2O3 powders coated with a few graphene layers. Composite powders with a total carbon content of 0.1, 0.6 and 1.0 wt. % were manufactured by chemical vapour deposition. The effect of the graphene content on the microstructure, mechanical and electrical properties of the compacts were studied. Graphene, homogenously located along the grain boundaries, dramatically hindered the Al2O3 grain growth. The continuous interconnected graphene network enhanced electrical properties, achieving percolation threshold as low as 0.6 wt. % of graphene. The content of 1 wt. % of graphene increased electroconductivity by 13 orders of magnitude as compared to the monolithic alumina. The indentation fracture toughness increased by 20 % in specimens with 0.6 wt. % graphene content as compared to pure alumina. The presence of 1.0 wt. % of graphene resulted in a slight decrease of elastic modulus and hardness, but strength decreased by 40 %.
科研通智能强力驱动
Strongly Powered by AbleSci AI