佩多:嘘
材料科学
热塑性聚氨酯
墨水池
薄板电阻
导电体
基质(水族馆)
导电油墨
导电聚合物
氧化铟锡
复合材料
聚苯乙烯磺酸盐
纳米技术
光电子学
图层(电子)
聚合物
弹性体
海洋学
地质学
作者
Indranil Basak,Gudrun Nowicki,Bart Ruttens,Derese Desta,Jeroen Prooth,Manoj Jose,Steven Nagels,Hans-Gerd Boyen,Jan D'Haen,Mieke Buntinx,Wim Deferme
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2020-12-04
卷期号:12 (12): 2915-2915
被引量:22
标识
DOI:10.3390/polym12122915
摘要
This paper presents the formulation, inkjet printing, and vacuum forming of a conductive and stretchable polymer, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), ink on a stretchable and transparent thermoplastic polyurethane (TPU) substrate. The formulation of the conductive and stretchable ink is achieved by combining PEDOT:PSS with additional solvents, to achieve the right inkjet properties for drop-on-demand (DoD) inkjet printing. A conductive pattern can be printed from the 21 µm orifice on a flexible and stretchable TPU substrate, with a linewidth down to 44 µm. The properties of the printed pattern, in terms of sheet resistance, morphology, transparency, impact of weather conditions, and stretching are investigated and show sheet resistances up to 45 Ohm/sq and transparencies as high as 95%, which is comparable to indium tin oxide (ITO). Moreover, in contrast to ITO, one-time stretching up to 40% can be achieved, increasing the sheet resistance up to 214 Ohm/sq only, showing the great potential of this ink for one-time stretching. Finally, as a proof of this one-time stretching, the printed samples are vacuum formed around a 3D object, still showing sufficient conductivity to be applied as a capacitive touch sensor.
科研通智能强力驱动
Strongly Powered by AbleSci AI