EUV lithography at the 22nm technology node

We are evaluating the readiness of extreme ultraviolet (EUV) lithography for insertion into production at the 15 nm technology node by integrating it into standard semiconductor process flows because we believe that device integration exercises provide the truest test of technology readiness and, at the same time, highlight the remaining critical issues. In this paper, we describe the use of EUV lithography with the 0.25 NA Alpha Demo Tool (ADT) to pattern the contact and first interconnect levels of a large (~24 mm x 32 mm) 22 nm node test chip using EUV masks with state-of-the-art defectivity (~0.3 defects/cm2). We have found that: 1) the quality of EUVL printing at the 22 nm node is considerably higher than the printing produced with 193 nm immersion lithography; 2) printing at the 22 nm node with EUV lithography results in higher yield than double exposure double-etch 193i lithography; and 3) EUV lithography with the 0.25 NA ADT is capable of supporting some early device development work at the 15 nm technology node.