传动系
涡轮机
扭矩
结构工程
工程类
转子(电动)
方位(导航)
刚度
非圆齿轮
动载试验
汽车工程
机械工程
螺旋锥齿轮
计算机科学
物理
热力学
人工智能
作者
Yi Guo,Jonathan A. Keller,William La Cava
出处
期刊:Wind Energy
[Wiley]
日期:2014-03-18
卷期号:18 (4): 757-768
被引量:82
摘要
An analytical formulation was developed to estimate the load‐sharing and planetary loads of a three‐point suspension wind turbine drivetrain considering the effects of non‐torque loads, gravity and bearing clearance. A three‐dimensional dynamic drivetrain model that includes mesh stiffness variation, tooth modifications and gearbox housing flexibility was also established to investigate gear tooth load distribution and non‐linear tooth and bearing contact of the planetary gears. These models were validated with experimental data from the National Renewable Energy Laboratory's Gearbox Reliability Collaborative. Non‐torque loads and gravity induce fundamental excitations in the rotating carrier frame, which can increase gearbox loads and disturb load sharing. Clearance in the carrier bearings reduces the bearing stiffness significantly. This increases the amount of pitching moment transmitted from the rotor to the gear meshes and disturbs the planetary load share, thereby resulting in edge loading. Edge loading increases the likelihood of tooth pitting and planet‐bearing fatigue, leading to reduced gearbox life. Additionally, at low‐input torque, the planet‐bearing loads are often less than the minimum recommended load and thus susceptible to skidding. Copyright © 2014 John Wiley & Sons, Ltd.
科研通智能强力驱动
Strongly Powered by AbleSci AI