Structural and physical properties of dried Anaheim chilli peppers modified by low‐temperature blanching

Abstract The effect of low‐temperature blanching and drying processes on the ultrastructural and physical properties of Anaheim chilli pepper was studied and optimum conditions to provide a final product with maximum firmness were determined. Lots of Anaheim pepper were blanched in water for 4 min at 48, 55, 65, 75 and 82 °C and maintained for hold times of 35, 45, 60, 75 and 85 min, blanched again for 4 min at 96 °C and dehydrated at 53, 60, 70, 80 and 87 °C. After treatment the samples were rehydrated in water at 30 °C. Rehydration ratio, texture and structural changes were evaluated. Optimisation used a second‐order rotatable central composite design. Texture and rehydration ratio were affected by blanching temperature and the interaction of blanching temperature with hold time (p ≤ 0.05); drying temperature did not show a significant effect. The best results, ie those which gave greatest firmness, were obtained by blanching at 64 °C for 4 min, holding for 55 min after blanching, followed by a second blanching at 96 °C for 4 min and then drying at 70 °C. Evaluation of the rehydrated dried pepper by microscopy showed that low‐temperature blanching close to the optimum conditions provided a protective effect in maintaining cell wall integrity. The results of processing increased firmness in the rehydrated product by a factor of 1.97. Copyright © 2003 Society of Chemical Industry