材料科学
超级电容器
石墨烯
碳纳米管
气凝胶
碳纤维
纳米技术
重量分析
电极
混合材料
电容
复合材料
复合数
有机化学
物理化学
化学
作者
Zhenghui Pan,Meinan Liu,Jie Yang,Yongcai Qiu,Wanfei Li,Yan Xu,Xinyi Zhang,Yuegang Zhang
标识
DOI:10.1002/adfm.201701122
摘要
Freestanding carbon‐based hybrids, specifically carbon nanotube@3D graphene (CNTs@3DG) hybrid, are of great interest in electrochemical energy storage. However, the large holes (about 400 µm) in the commonly used 3D graphene foams (3DGF) constitute as high as 90% of the electrode volume, resulting in a very low loading of electroactive materials that is electrically connected to the carbon, which makes it difficult for flexible supercapacitors to achieve high gravimetric and volumetric energy density. Here, a hierarchically porous carbon hybrid is fabricated by growing 1D CNTs on 3D graphene aerogel (CNTs@3DGA) using a facile one‐step chemical vapor deposition process. In this architecture, the 3DGA with ample interconnected micrometer‐sized pores (about 5 µm) dramatically enhances mass loading of electroactive materials comparing with 3DGF. An optimized all‐solid‐state asymmetric supercapacitor (AASC) based on MnO2@CNTs@3DGA and Ppy@CNTs@3DGA electrodes exhibits high volumetric energy density of 3.85 mW h cm−3 and superior long‐term cycle stability with 84.6% retention after 20 000 cycles, which are among the best reported for AASCs with both electrodes made of pseudocapacitive electroactive materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI