成像体模
材料科学
生物医学工程
介电常数
电介质
同种类的
计算机科学
表征(材料科学)
耗散因子
制作
声学
光学(聚焦)
乳腺组织
乳腺摄影术
相(物质)
无线电频率
电子工程
财产(哲学)
频率响应
航程(航空)
工作(物理)
医学物理学
相位响应
切线
相对介电常数
介电损耗
作者
Marwa Slimi,Bassem Jmai,Paulo Mateus Mendes,Ali Gharsallah
摘要
ABSTRACT As in many medical device systems development, the design of radiofrequency breast tumor detection systems undergoes a test phase based on the use of liquid phantoms. It is well known the difficulty in obtaining phantoms that precisely model each tissue for each frequency of interest while keeping such properties for a long time. Despite the many available studies using such phantoms, limited information is available on a systematic analysis of the effect that the use of an imprecise phantom may have on the characterization of radiofrequency systems. This work presents the design and fabrication of ultra‐wideband liquid breast and tumor phantoms. The main issue with this approach is that incorrect phantom properties, as well as an incorrect frequency response, lead to assessment errors. The current research focus is mainly focused on the model of the phantom, rather than its electromagnetic properties. Typically, the EM properties of breast phantoms are accurate only in a small frequency range, and these properties are frequency dependent. To address this issue, we validated a homogeneous breast phantom with good results in terms of dielectric permittivity (1.613% < error < 3.22%) and loss tangent (error < 33%) in the wide frequency range of [1–6] GHz. The proposed phantom retains its properties for a significant period of time, degrading only 6.78% in 2 h after fabrication while exposed to the environment. When it is stored in a container, only a small variation of ±1.7% was registered after 9 months.
科研通智能强力驱动
Strongly Powered by AbleSci AI