润滑油
润滑油
材料科学
粗糙度(岩土工程)
复合材料
图层(电子)
多孔性
方位(导航)
润滑
机械
计算机科学
物理
人工智能
作者
Shuo Zhang,Benjamin Klinghart,Georg Jacobs,Stephan von Goeldel,Florian König
标识
DOI:10.1016/j.triboint.2024.109369
摘要
While a rolling element bearing is operating, the lubricating film is desired to maintain a sufficient thickness to avoid asperity contact between surfaces. When using grease as lubricant, the film thickness undergoes evolution over time, due to the transient formation of the deposited thickener-rich layer and a bled oil film. Therefore, a model, which can address both type of film formation, is required. In this contribution, an experimentally validated numerical model is proposed by assuming the grease as a porous medium. This model can calculate the transient formation of thickener-rich layer and the oil bleeding process for grease-lubricated contacts. The predicted film thickness evolution, by superposing the thickener-rich layer and oil film, shows a reasonable agreement with the experimental result.
科研通智能强力驱动
Strongly Powered by AbleSci AI