膜
纤维素
化学工程
润湿
材料科学
接触角
化学
复合材料
生物化学
工程类
作者
Tong Xing,Changqing Dong,Xiaoying Hu,Junjiao Zhang,Ying Zhao,Xiaoqiang Wang,Junjie Xue,Xuming Zhang
出处
期刊:Bioresources
[North Carolina State University]
日期:2022-12-22
卷期号:18 (1): 1251-1259
标识
DOI:10.15376/biores.18.1.1251-1259
摘要
Cellulose is a potential alternative to petroleum-derived polymers, and cellulose membranes are used in many applications such as sensors, flexible materials, and functional membranes. Most bottom-up methods are energy-, chemical-, and time-intensive compared to top-down methods for preparing cellulose membranes. Additionally, most methods to improve the hydrophobicity of cellulose membranes to increase their lifetime are complex and require large amounts of organic solvents. To balance sustainability, degradability, and service life from a whole life cycle perspective, which is the biggest challenge for the industrialization of cellulose membranes, a top-down approach was used here to prepare cellulose membranes using camphor pine, walnut, and loofah materials. The effect of low temperature heat treatment on the prepared membranes’ wettability and water stability were investigated. The results showed that the water stability of loofah cellulose membrane was influenced by both surface and internal wettability due to the non-homogeneous structure. The heat treatment temperature of 200 °C for loofah cellulose membrane, 150 °C for camphor pine cellulose membrane, and 225 °C for walnut cellulose membrane was more effective.
科研通智能强力驱动
Strongly Powered by AbleSci AI