Multiple Linkage Modification of Lithium-Rich Layered Oxide Li1.2Mn0.54Ni0.13Co0.13O2 for Lithium Ion Battery

A multiple linkage modification (MLM) method was investigated to comprehensively improve the properties of lithium-rich layered oxides. MLM Li1.2Mn0.54Ni0.13Co0.13O2 was successfully synthesized via continuous and appropriate heat treatment. The synthesized Li1.2Mn0.54Ni0.13Co0.13O2 particles were coated with a Li2ZrO3 layer and doped with Zr4+ by using a Zr compound as the MLM reagent. The Li2ZrO3 coating layer could protect materials from the corrosion of hydrogen fluoride, and the structure of the base materials was stabilized due to Zr4+ doping. In addition, the formation of Li2ZrO3 captured inactive residual lithium on the surface and absorbed lithium of host materials, thereby leading to the reduction in the Li/M ratio of materials and promoting the first-cycle Coulombic efficiency. The MLM material delivered the highest initial cycle Coulombic efficiency (∼85%), the best cycle and rate performance among bare and ZrO2-coated particles. These results indicate that MLM is an important technique for improving the performance of electrode materials.