材料科学
光电流
异质结
纳米管
碳纳米管
电铸
光电子学
暗电流
光电探测器
光活性层
纳米技术
图层(电子)
电极
激光器
能量转换效率
聚合物太阳能电池
光学
物理化学
化学
物理
作者
Guowei Zhang,Jia‐Lin Sun,Jinquan Wei,Huanhuan Sun,Jia‐Lin Zhu
出处
期刊:Nanotechnology
[IOP Publishing]
日期:2013-10-24
卷期号:24 (46): 465203-465203
被引量:9
标识
DOI:10.1088/0957-4484/24/46/465203
摘要
Traditional TiO2 based photodetectors (PDs) suffer from high dark resistance, which increases loss of photoexcited charge carriers. Here, we report a new and simple way to improve the performance of PDs based on double-walled carbon nanotube (DWCNT)/TiO2 nanotube heterojunctions. Highly ordered TiO2 nanotube arrays were fabricated using a two-step anodic oxidation method, and coated with a DWCNT film, which functioned as a semitransparent electrode and a photoactive layer. Via pre-electroforming, the device was switched from a high resistance state (HRS) to a low resistance state (LRS). At an applied bias of 1 V, the dark resistance was reduced from 926 to 0.67 kΩ, as a result of the formation of oxygen vacancy related conducting filaments. The photoresponse (ΔI = Ip - Id, where Ip and Id represents photocurrent and dark current, respectively) of the PD in LRS reached 816.76 μA W(-1) under 532 nm laser illumination and 802.89 μA W(-1) under 1064 nm laser irradiation, which is 965 and 3980 times higher, respectively, than those obtained from the HRS device under the same conditions. This strategy for enhancing the photoresponse of TiO2 based PDs may have applications in further improving the power conversion efficiency of dye-sensitized solar cells.
科研通智能强力驱动
Strongly Powered by AbleSci AI