电解质
材料科学
阳极
电化学
锂(药物)
化学工程
石墨
电池(电)
阴极
电极
锂电池
复合材料
化学
离子
离子键合
物理化学
医学
功率(物理)
物理
有机化学
量子力学
工程类
内分泌学
作者
G. V. Alexander,M.S. Indu,K. Selvajyothi,Ramaswamy Murugan
标识
DOI:10.1016/j.electacta.2019.135511
摘要
Abstract Dense garnet structured solid electrolytes exhibit great promise for lithium metal batteries owing to its high lithium ion conductivity, good mechanical and electrochemical properties. However, the rigid interfacial contact between garnet structured electrolyte and electrode stymie their practical application. In this study, we propose an effective strategy to improve the lithium wettability of Li6.28Al0.24La3Zr2O12 (LLZA) with graphite (G) or lithium niobate [LiNbO3 (LNbO)] buffer layer. Our experimental investigation reveals a significant decrease in metallic lithium (Li) - LLZA interface resistance from 1078 Ω cm2 to 91 Ω cm2 and 58 Ω cm2 by the application of a thin LiNbO3/graphite buffer layer, respectively. In addition, Li |G-LLZA-G| Li cell exhibits a stable lithium stripping/platting performance with small voltage hysteresis and endures a critical current density up to 750 μA cm−2 in comparison to Li|LNbO-LLZA-LNbO|Li and its counterpart (Li |LLZA| Li). As a proof-of-concept, we demonstrate a stable cycling performance of quasi-solid-state battery with surface modified LLZA (G-LLZA) as solid electrolyte, lithium metal as anode and LiNi0.33Mn0.33Co0.33O2 (NMC) as cathode with an initial discharge capacity of 162 mA h g−1 (50 μA cm−2) and 149 mA h g−1 (100 μA cm−2) at room temperature (25 °C).
科研通智能强力驱动
Strongly Powered by AbleSci AI