居里温度
相界
材料科学
压电
锆钛酸铅
四方晶系
凝聚态物理
掺杂剂
矿物学
铁电性
兴奋剂
锆酸盐
钛酸酯
压电系数
相(物质)
复合材料
晶体结构
结晶学
电介质
陶瓷
化学
铁磁性
光电子学
物理
有机化学
作者
Shruti B. Seshadri,Michelle M. Nolan,Goknur Tutuncu,Jennifer S. Forrester,Eva Sapper,Giovanni Esteves,Torsten Granzow,Pamela A. Thomas,Juan C. Nino,Tadej Rojac,Jacob L. Jones
标识
DOI:10.1038/s41598-018-22566-5
摘要
Large piezoelectric coefficients in polycrystalline lead zirconate titanate (PZT) are traditionally achieved through compositional design using a combination of chemical substitution with a donor dopant and adjustment of the zirconium to titanium compositional ratio to meet the morphotropic phase boundary (MPB). In this work, a different route to large piezoelectricity is demonstrated. Results reveal unexpectedly high piezoelectric coefficients at elevated temperatures and compositions far from the MPB. At temperatures near the Curie point, doping with 2 at% Sm results in exceptionally large piezoelectric coefficients of up to 915 pm/V. This value is approximately twice those of other donor dopants (e.g., 477 pm/V for Nb and 435 pm/V for La). Structural changes during the phase transitions of Sm-doped PZT show a pseudo-cubic phase forming ≈50 °C below the Curie temperature. Possible origins of these effects are discussed and the high piezoelectricity is posited to be due to extrinsic effects. The enhancement of the mechanism at elevated temperatures is attributed to the coexistence of tetragonal and pseudo-cubic phases, which enables strain accommodation during electromechanical deformation and interphase boundary motion. This work provides insight into possible routes for designing high performance piezoelectrics which are alternatives to traditional methods relying on MPB compositions.
科研通智能强力驱动
Strongly Powered by AbleSci AI