3d打印
材料科学
粘附
纤维
复合材料
生物医学工程
工程类
作者
Mengqiang Zou,Changrui Liao,Yanping Chen,Zongsong Gan,Shen Liu,Dejun Liu,Li Liu,Yiping Wang
出处
期刊:Biosensors
[Multidisciplinary Digital Publishing Institute]
日期:2022-08-11
卷期号:12 (8): 629-629
被引量:18
摘要
With the current trend of device miniaturization, the measurement and control of interfacial adhesion forces are increasingly important in fields such as biomechanics and cell biology. However, conventional fiber optic force sensors with high Young’s modulus (>70 GPa) are usually unable to measure adhesion forces on the micro- or nano-Newton level on the surface of micro/nanoscale structures. Here, we demonstrate a method for interfacial adhesion force measurement in micro/nanoscale structures using a fiber-tip microforce sensor (FTMS). The FTMS, with microforce sensitivity of 1.05 nm/μN and force resolution of up to 19 nN, is fabricated using femtosecond laser two-photon polymerization nanolithography to program a clamped-beam probe on the end face of a single-mode fiber. As a typical verification test, the micronewton-level contact and noncontact adhesion forces on the surfaces of hydrogels were measured by FTMS. In addition, the noncontact adhesion of human hair was successfully measured with the sensor.
科研通智能强力驱动
Strongly Powered by AbleSci AI