材料科学
光探测
量子效率
光电子学
光电探测器
非阻塞I/O
量子点
离子
活动层
钝化
纳米技术
图层(电子)
物理
催化作用
化学
薄膜晶体管
量子力学
生物化学
作者
Pan Xia,Tong Zhu,Muhammad Imran,João M. Pina,Ozan Atan,Amin Morteza Najarian,Hao Chen,Yangning Zhang,Euidae Jung,Margherita Biondi,Maral Vafaie,Chongwen Li,Luke Grater,Aayushi Khatri,Ajay Singh,Sjoerd Hoogland,Edward Hartley Sargent
标识
DOI:10.1002/adma.202310122
摘要
Abstract III‐V colloidal quantum dots (CQDs) are of interest in infrared photodetection, and recent developments in CQDs synthesis and surface engineering have improved performance. Here this work investigates photodetector stability, finding that the diffusion of zinc ions from charge transport layers (CTLs) into the CQDs active layer increases trap density therein, leading to rapid and irreversible performance loss during operation. In an effort to prevent this, this work introduces organic blocking layers between the CQDs and ZnO layers; but these negatively impact device performance. The device is then, allowing to use a C60:BCP as top electron‐transport layer (ETL) for good morphology and process compatibility, and selecting NiO X as the bottom hole‐transport layer (HTL). The first round of NiO X ‐based devices show efficient light response but suffer from high leakage current and a low open‐circuit voltage (Voc) due to pinholes. This work introduces poly[bis(4‐phenyl) (2,4,6‐trimethylphenyl)amine] (PTAA) with NiO X NC to form a hybrid HTL, an addition that reduces pinhole formation, interfacial trap density, and bimolecular recombination, enhancing carrier harvesting. The photodetectors achieve 53% external quantum efficiency (EQE) at 970 nm at 1 V applied bias, and they maintain 95% of initial performance after 19 h of continuous illuminated operation. The photodetectors retain over 80% of performance after 80 days of shelf storage.
科研通智能强力驱动
Strongly Powered by AbleSci AI