Ammonia/syngas MILD combustion by a novel burner

Ammonia has received increasing attention as one of the most attractive energy carriers because of its carbon-free nature and the established reliable and economic infrastructure for its storage and distribution. However, the low burning velocity and nitrogen-containment of pure NH3 can cause some challenges for its combustion control such as flame instability and large NOx emissions. To overcome these issues, strategies of co-burning NH3 with highly reactive fuels such as CH4 or H2 have been developed and applied. Syngas, which can be produced from biomass pyrolysis, is a promising alternative fuel in the transition from carbon-based fuels to carbon-free fuels. Therefore, comparing to co-firing NH3 with CH4, co-firing NH3 with syngas is a better environmentally friendly option to improve the NH3 combustion property. However, co-firing NH3 with syngas faces severer combustion instability, NOx emissions and NH3 leakage due to the low heating value of syngas. To the best of the authors’ knowledge, the NH3/syngas combustion with low NOx emissions and zero NH3 leakage has not been achieved in a lab-scale combustor. In the present study, NH3/syngas MILD combustion was carried out in a novel burner developed in our previous work. In the novel burner, the high-temperature and diluted air produced by the lean premixed syngas combustion is the key to accomplish the MILD combustion of NH3. The impact of the temperature and O2 mole fraction of the HTDA on the emissions of NO, NO2, N2O, NH3, and CO was experimentally investigated with varying equivalence ratios and NH3 flow rates. The chemical reactor network was employed to analyze the experimental observation from the chemical kinetic aspect.