Effect of storage temperature on the dimensional stability of DLP printed casts

Despite studies focusing on the accuracy and dimensional stability of additive manufacturing, research on the impact of storage conditions on these properties of 3-dimensional (3D) printed objects is lacking.The purpose of this in vitro study was to investigate the influence of storage temperature on the dimensional stability of digital light processing (DLP) printed casts and to determine how different locations in printed casts react differently.A completely dentate maxillary typodont model was digitized with a desktop laser scanner. The typodont was subsequently modified with a software program by adding cuboids with a side length of 3 mm on both maxillary central incisors, first molars, and second molars. The file was saved in the standard tessellation language (STL) format. The modified digitized typodont was then processed through the DLP technology printing process with a desktop DLP printer and photopolymerizing resin. The casts were printed 32 times and stored in sealed plastic bags, shielded from light, and subjected to 4 different temperature conditions (-20 °C, 4 °C, 20 °C, and 37 °C, n=8 each). The cuboids on the central incisors were labeled as the P1 group, first molars as the P2 group, and second molars as the P3 group. The distance between the cuboids was measured 5 times, with results recorded immediately after cast production and at 1, 2, 3, 5, 7, 14, and 28 days after. Repeated analysis of variance (ANOVA) and the Tukey honestly significant difference (HSD) test were used to compare the recorded values among the groups (α=.05).In the P1 group, the casts stored at -20 °C exhibited the smallest overall size change, with a mean ±standard deviation volume of 99.42 ±0.04% compared with the original casts after 28 days of storage. This was followed by the casts stored at 4 °C, 20 °C, and 37 °C, with remaining volumes of 99.39 ±0.06% (P=.139), 99.14 ±0.08% (P<.001), and 98.96 ±0.03% (P<.001), respectively. For the P2 and P3 groups, casts stored at 4 °C retained the most volume at 99.82 ±0.01%, whereas those stored at -20 °C, 20 °C, and 37 °C underwent greater changes, with remaining volumes of 99.66 ±0.03%, 100.32 ±0.02%, and 100.44 ±0.02%, respectively (P<.001). The P3 group exhibited a similar trend to that of the P2 group, with the casts stored at 4 °C remaining closest to the original dimensions at 99.86 ±0.02%, while casts stored at -20 °C showed 99.73 ±0.03% of the original volume and those stored at 20 °C and 37 °C expanded with volumes of 100.37 ±0.03% and 100.48 ±0.03%, respectively (P<.001).DLP printed casts stored at 4 °C exhibited the greatest overall dimensional stability, followed sequentially by those stored at -20 °C, 20 °C, and 37 °C. Additionally, the study confirmed that the posterior and anterior teeth regions of DLP printed casts respond differently to different storage temperatures.