击穿电压
饱和电流
肖特基二极管
材料科学
反向漏电流
光电子学
肖特基势垒
二极管
碳化硅
电场
宽禁带半导体
电气工程
电压
泄漏(经济)
限制
结温
功率(物理)
工程类
复合材料
物理
机械工程
宏观经济学
量子力学
经济
作者
Jingping Zhang,Houcai Luo,Huan Chun Wu,Zeping Wang,Bofeng Zheng,Xianping Chen
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2022-08-10
卷期号:: 1-5
被引量:3
标识
DOI:10.1109/icept56209.2022.9873379
摘要
Compared with Si, SiC has advantages of wide band gap, high critical electric field, high electron saturation velocity and high thermal conductivity, making SiC power devices develop rapidly in recent years. In the field of power diode, junction barrier Schottky (JBS) diode not only inherits the advantages of Schottky diode with high switching speed and low reverse recovery current, but also greatly improves the reverse breakdown voltage without increasing the leakage current of the device. In this paper, a 4H-SiC JBS with a breakdown voltage of 1200V was designed and simulated. The termination of the device adopts the field limiting ring (FLR) structure, and the parameters of the cell and FLR termination protection structure are optimized. With the optimized structure parameters, the TCAD simulation results show the reverse breakdown voltage of the designed 4H-SiC JBS can reach 1676.2 V without considering the terminal protection efficiency. And the breakdown voltage can reach 1542.7 V when considering the FLR termination structure. The termination protection efficiency is up to 92%.
科研通智能强力驱动
Strongly Powered by AbleSci AI