材料科学
烧蚀
悬臂梁
复合材料
梁(结构)
扫描电子显微镜
激光烧蚀
压力(语言学)
断裂(地质)
软化
刚度
激光器
压缩(物理)
失效机理
结构工程
光学
语言学
工程类
航空航天工程
物理
哲学
作者
Yuting Zhao,Ruokun Zhang,Zhuhua Tan
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2025-08-06
卷期号:17 (15): 2153-2153
被引量:1
标识
DOI:10.3390/polym17152153
摘要
This paper focuses on the failure mechanism of a pre-stressed CFRP cantilever beam under laser ablation. During testing, a mass was applied to the CFRP cantilever beam to achieve a pre-stressed state, and the laser power densities varied from 500 to 1500 W·cm−2. Corresponding scanning electron microscope (SEM) tests were also performed on the ablation zone and fracture surface to analyze the failure mechanism. The results showed that the CFRP beam failed in compression at the bottom surface, which was due to a decrease in local stiffness and strength caused by heat softening, rather than by ablation damage on the top surface. The failure time decreased from 19.64 s to 6.52 s as the power density (500–1500 W·cm−2) and pre-stress loading (300–750 N·cm) increased, indicating that pre-stress loading has a more significant influence on the failure time of CFRP beams compared to power density.
科研通智能强力驱动
Strongly Powered by AbleSci AI