A CMOS-based highly scalable flexible neural electrode interface

Abstract Perception, thoughts, and actions are encoded by the coordinated activity of large neuronal populations spread over large areas. Using thin film electrocorticography (ECoG) arrays, this cortical activity has been used to decode speech and individual finger movements, enabling neuroprosthetics, and to localize epileptic foci. However, the connectorization of these multi-thousand channel thin-film arrays to external circuitry is challenging; current state-of-the-art methods are complex, bulky, and unscalable. We address this shortcoming by developing an electrode connector based on an ultra-conformable thin film electrode array that self-assembles onto hard silicon chip sensors, such as microelectrode arrays (MEAs) or camera sensors enabling large channel counts at high density. The interconnects are formed using microfabricated electrode pads suspended by thin support arms, termed flex2chip. Capillary-assisted assembly drives the pads to deform towards the chip surface, and van der Waals forces maintain this deformation, establishing mechanical and Ohmic contact onto individual pixels. We demonstrate a 2200-channel array with a channel density of 272 channels / mm 2 connected to the MEA through the flex2chip interconnection method. Thin film electrode arrays connected through the flex2chip successfully measured extracellular action potentials ex vivo. Furthermore, in a transgenic mouse model for absence epilepsy, Scn8a +/- , we observed highly variable propagation trajectories at micrometer scales, even across the duration of a single spike- and-wave discharge (SWD).