As a key intelligent vehicle chassis component, the Steer-by-Wire (SBW) system features a simplified structure but faces severe operational stability risks from simultaneous multi-sensor failures.This article develops an active fault-tolerant framework for the SBW system, focusing on addressing the challenge of multiple sensor failures occurring simultaneously.By establishing a dynamic model and using sliding mode control method for SBW steering control, this paper proposes a front wheel active steering system that combines ideal speed ratio and linear quadratic regulator (LQR).In addition, a vehicle state estimation method based on an improved generalized Kalman filter was designed, and a sensor fault diagnosis strategy was constructed using the residual principle to achieve fault-tolerant control of faulty sensors.The experimental results show that the scheme has excellent anti-interference performance, significantly improves the system's fault tolerance(FT), and reduces potential traffic accidents.