材料科学
微型反应器
催化作用
法拉第效率
电解质
铜
化学工程
串联
碳纤维
无机化学
电流密度
联轴节(管道)
大规模运输
纳米技术
整体
电化学
氧化还原
工作(物理)
作者
Ruotian Liu,Simin Liu,Xinyao Zou,Chongqing Yang,Yue Fei,Shun Li,Yilong Yang,Mingyuan Sun,Zeyu Guo,Chenbao Lu,Ang Li,Xiaozhi Su,Xiaodong Zhuang,Lei Zhu,Zhiyong Huang
摘要
ABSTRACT Electrocatalytic CO 2 to produce multicarbon products (C 2+ ) by Cu‐based catalysts has long been hindered at high current densities, due to the sluggish mass transport at the electrolyte and catalyst interface. Herein, an ordered hierarchical porous carbon microreactor hosting atomically dispersed Ni sites is rationally designed, enabling outstanding CO 2 penetration and interfacial * CO supply with CO Faradaic efficiency (FE CO ) up to 93.1% over 100 h. Coupling with Cu nanoclusters, the tandem catalyst allows fast CO 2 to CO conversion and CO delivery to Cu interfaces, where localized C‐C coupling and subsequent reduction are promoted, thereby accelerating C 2+ product production. As a result, the as‐made catalyst demonstrates C 2+ product FE (FE C2+ ) up to 73.5% at a high current density of 800 mA cm −2 with a production rate up to 1.93 mmol h −1 cm −2 , which are all much higher than those for bare Cu (FE C2+ : 44.3%; rate: 1.23 mmol h −1 cm −2 ). In situ experiments and theoretical calculations indicate that abundant * CO supply and reduced energy barrier for hydrogenation and C‐C coupling synergistically upgrade intermediate CO to C 2+ products. This work provides a general approach to alleviate the high‐speed mass transportation limitations between electrolyte and catalyst, and eventually boosts efficient C 2+ production from CO 2 at high current density.
科研通智能强力驱动
Strongly Powered by AbleSci AI