Abstract The emission of per- and polyfluoroalkyl substances (PFAS) resulted from surging industrialization poses environmental threat and health risk second to none. Strategies for efficient removal and ultrasensitive detection of PFAS from contaminated water is therefore sought after. Yet, achieving both missions simultaneously with a single material remains a great challenge. Here we report a conductive organic cage with tetrathiafulvalene facets (ReTTFcage) that can serve as high performance adsorbent to capture trace perfluorooctanoic acid (PFOA) and be made into a cage-based field-effect transistor (cageFET) for on-site, ppq-level PFOA sensing from water bodies. By designing the synergy of charge-transfer, hydrogen bonds and electrostatic interactions, this cage manifests high affinity to PFOA and thus break the trade-off between the maximum adsorption capacity (Qm) and adsorption kinetics (kobs), attaining PFOA uptake of 4210 mg g-1 and an uptake rate up to 60500 g mg-1 h-1. It can also decontaminate PFOA in flowing water down to a picogram level (82 pg L-1) that is otherwise unattained by other materials, far below the strictest international criteria (4 ng L-1). Moreover, the electroactive TTF units endow the molecular cages with tunable conductivity upon hosting PFOA, allowing a transistor sensing with limit of detection (LoD) as low as 0.6 ppq (0.6 pg L-1), on par with LC-MS gold standard but offering a miniature size (1 × 1 cm) and swift response (~30 s) absent in LC-MS technique. This study translates cage materials into a two-in-one platform for on-site remediation and synchronized assessment of environmental PFAS.