Measurements of temperature and velocity using thermocouples and an impact probe were made in the near field of a purely buoyant diffusion flame produced by a porous refractory burner.Based on time-averaged center line value of V and AT together with photographic records the flame can be conveniently divided into three distinct regimes:(1) a continous flame region, starting from the surface of the burner with V equal to zero at the surface and rising with the height above the burner, z, to the 1/2 power.AT is constant over this regime.Higher up is (2), an intermittent regime, with pulsating flame ( ~3 Hz) exhibiting approximately constant V and AT falling with z to the first power.Still higher is (3) the plume region which is, most of the time, free of -1/3 -5/3 to time-averaged signal ratio rises from the center line value and approaches 100% in the wings.Elementary spectral analysis indicates that most of this energy is concentrated in a narrow band centered around 3 Hz.Implications of these results for flame entrainment calculations and heat release rates will be discussed.