絮凝作用
化学
木质素
明矾
浊度
脱水
废水
制浆造纸工业
氯化物
纤维素
核化学
有机化学
废物管理
地质学
工程类
海洋学
岩土工程
作者
Ahmad Mujahid Md Noor,Safia Syazana Mohtar,Norasikin Saman,Tengku Nur Zulaikha Tengku Malim Busu,Norsalliana Shaari,Nor Aida Yusoff,Hanapi Mat
标识
DOI:10.1080/02773813.2019.1636823
摘要
Quaternized lignin-based flocculant (QL) was prepared by a single-step reaction of an extracted lignin (EL) derived from oil palm empty fruit bunches (OPEFB) with 3-chloro-2-hydroxypropyl trimethylammonium chloride (CHPTAC) under alkaline condition. The performance of QLs was studied for various β values (molar ratios of CHPTAC to phenylpropanoid unit of lignin), flocculant dosages, pH values, kaolin concentrations, slow mixing rates and sedimentation times. The QL10 achieved the highest turbidity removal efficiency (εt) with increasing flocculant dosage, pH and kaolin concentration to the optimal conditions of 5 mg L−1, pH 7 and 1000 mg L−1, and required 20 min of sedimentation time at all the mixing rates tested. The flocculation kinetics agreed well with the particle collision model. The QL10 has good sludge dewatering properties compared to the alum. It also showed encouraging results in water quality analysis for sewage wastewater flocculation in comparison to that of the alum. This indicates the potential application of QL in treating water and wastewater.
科研通智能强力驱动
Strongly Powered by AbleSci AI