材料科学
复合材料
聚酰胺
复合数
极限抗拉强度
热稳定性
结晶
玻璃纤维
化学工程
工程类
作者
Jinchuan Chen,Huajie Xu,Chuntai Liu,Liwei Mi,Changyu Shen
标识
DOI:10.1016/j.compscitech.2018.09.007
摘要
Given the advantages of polyethyleneimine (PEI) for interface modification of carbon fiber reinforced polyamide 66 composite (CF/PA66), an effective method was developed to fabricate [email protected] The XPS results confirmed [email protected] was covered with a double grafted layer. Interface stability investigated showed thermal stability (under injection molding temperature, about 270 °C) and structural stability of [email protected]/PA66 interface were both improved, but PA66 crystallization behavior affected by [email protected] was identical with that of pure PA66. The contact angle tests exhibited that its compatibility with PA66 was also enhanced. Its interfacial shear strength, composite tensile strength and elastic modulus increased by 64.74%, 27.58% and 22.68% compared with that of untreated-CFs and composite, respectively. These best mechanical properties were ascribed to the formation of “fish-scale” layers on pull-out fibers resulted from [email protected] modification. It could be concluded that [email protected] would not only enhance its composite mechanical properties, but also exhibit much fiber pull-out and avoid the catastrophic failure for [email protected]/PA66 composites. This CF surface modification study would be beneficial to expand application of thermoplastic composite with reusability.
科研通智能强力驱动
Strongly Powered by AbleSci AI