材料科学
发光
无定形固体
拉曼光谱
结晶
兴奋剂
玻璃化转变
热稳定性
衰减系数
分析化学(期刊)
半最大全宽
吸收(声学)
光纤
受激发射
声子
光谱学
吸收光谱法
热膨胀
红外线的
波长
光学
发射光谱
红外光谱学
玻璃纤维
光子学
热的
热分析
光电子学
光放大器
温度系数
作者
Yue Zhang,Chaomin Zhang,Guishun Li,Biao Han,Haijun Zhao
标识
DOI:10.1117/1.oe.65.9.097104
摘要
Er3+-doped fluorotellurite glasses with the composition 70TeO2–10ZnF2–10Nb2O5–5BaF2–5WO3–xEr2O3 (x=0,0.5,1,1.5,2.0,3.0 mol%) were prepared by the conventional melt-quenching method. The effect of Er2O3 doping on the structure, thermal stability, and mid-infrared luminescence properties of the glasses was systematically studied. XRD results show that all samples are amorphous with no crystalline phase. Raman spectroscopy reveals that the glass network primarily consists of [TeO3], [TeO4], [TeO3+1], [NbO6], [WO4], and [WO6] units. ZnF2 and BaF2 doping reduce the glasses’ maximum phonon energy. DSC analysis shows that the glass has a glass transition temperature (Tg) of 416°C and an onset crystallization temperature (Tx) of 526°C, yielding a ΔT value of 110°C, which indicates good thermal stability suitable for optical fiber drawing. Under 980 nm excitation, the glasses exhibit strong infrared emissions at 1.5 and 2.7 μm. The 2.7 μm emission reaches its maximum at 3.0 mol% Er2O3, with a full width at half maximum of 224 nm. In addition, the TE1.0 glass shows absorption and emission cross-sections of 1.61×10–21 and 1.69×10–21 cm2, respectively, at 1.5 μm, together with a maximum gain coefficient of 2.34 cm–1. These results indicate that the prepared glasses are promising for 2.7 μm mid-infrared photonic sources and 1.5 μm optical amplification.
科研通智能强力驱动
Strongly Powered by AbleSci AI