( Invited ) Precision Assembled Single-Layer Pouch Cells with Reference Electrode for Studying Emerging Battery Chemistries
作者
Laurence A. Middlemiss,Edurne Redondo,Elizabeth Spencer,Richard Fields,Robert A. W. Dryfe
出处
期刊:Meeting abstracts [Institute of Physics] 日期:2026-07-07卷期号:MA2026-01 (3): 237-237
标识
DOI:10.1149/ma2026-013237mtgabs
摘要
Precise and reproducible electrochemical testing of lithium and post-lithium battery materials is essential for both academic research and industrial development. While coin cells are widely used for their simplicity and accessible assembly method, they offer limited control over critical variables such as electrode alignment, pressure distribution, and reference electrode placement—each of which can introduce noise or variability into measured performance data. To address these limitations, we present a modular platform for the precision assembly of single-layer pouch (SLP) cells, incorporating differing quasi-reference electrode (QRE) configurations for specific analytical scenarios. This work focuses on the integration of QREs into reproducible pouch cell architectures, enabling the direct measurement of anode and cathode potentials during cycling and impedance spectroscopy. A comparison of a traditional rectangular SLP format vs a novel circular SLP format, which uses standard coin cell electrodes, will be demonstrated. We will compare the electrochemical behaviour of lithium and sodium based full cells assembled in precision SLP cells alongside their coin cell equivalents. Key focus areas include rate performance, impedance characteristics, potential drift, and system contamination. Early results suggest that improved component alignment in SLP cells leads to greater consistency in impedance measurements and reduced variation between replicates. Data comparing how the circular SLP format compares to traditional rectangular cell format will be provided. A central component of this study is the evaluation of different reference electrode placements within the pouch cell stack. By systematically varying the position of the quasi-reference electrode relative to the active layers, we aim to understand its influence on potential measurement stability and signal quality. Alongside this, electrode alignment has been varied to assess the further impact on measurements. This aspect is particularly important for interpreting impedance spectra and identifying electrode-specific degradation mechanisms. We will present results demonstrating how small shifts in electrode and reference positions can introduce measurable deviations in EIS data, especially at high frequencies. The system used in this study supports automated or semi-automated stacking with sub-millimeter placement accuracy, reducing user-dependent variability and improving data reproducibility. Images captured by the system were used to validate component placement with X-ray computed tomography used to corroborate the results. This approach offers a valuable alternative to coin cell testing, particularly for researchers aiming to extract electrode-specific performance metrics or study electrode degradation in operando, an aspect of particular importance when designing and testing full cell configurations. Ultimately, precision SLP cell assembly with integrated QRE could help standardize electrochemical testing methods across labs and accelerate the development of new materials for lithium-ion and sodium-ion batteries. Figure 1 - Exploded view of a three-electrode single-layer pouch cell. The components are labeled and aligned vertically to show the assembly sequence from top to bottom. The reference electrode allows independent measurement of the anode and cathode potentials during cycling, and precision placement enabled precise EIS measurement. Figure 1