催化作用
煅烧
化学
X射线光电子能谱
无机化学
程序升温还原
混合氧化物
物理吸附
氧化物
化学工程
有机化学
工程类
作者
Zhenyou Gui,Shunmugavel Saravanamurugan,Wenrong Cao,Leonhard Schill,Lifang Chen,Zhiwen Qi,Anders Riisager
标识
DOI:10.1002/slct.201701325
摘要
Abstract A series of Mn−Co binary oxides were prepared by a simple thermal decomposition procedure and evaluated for the aerobic oxidation of 5‐hydroxymethylfurfural (HMF) into 2,5‐diformylfuran (DFF). Investigation of the effects of metal amounts and calcination temperatures of the prepared catalysts revealed that the Mn−Co binary oxide with a Mn/Co molar ratio of 1/1 showed the best catalytic performance yielding 42.6 % HMF conversion along with 98 % selectivity to DFF after 2 h of reaction. The as‐prepared catalysts were characterized by nitrogen physisorption, X‐ray powder diffraction (XRD), hydrogen temperature‐programmed reduction (H 2 ‐TPR) and X‐ray photoelectron spectroscopy (XPS). These results indicated that the Mn−Co binary oxides could increase the Mn 4+ /Mn 3+ atomic ratio and the exposed lattice oxygen content on the surface, thus accelerating the HMF oxidation into DFF. Furthermore, the Mn−Co binary oxides proved to be reusable in five consecutive reaction runs without significant loss of activity.
科研通智能强力驱动
Strongly Powered by AbleSci AI