Insights into effect of lignocellulosic biomass framework types on bio-based shape stable composite phase change materials

The utilization of biomass waste as framework materials to inhibit the leakage of phase change material (PCMs) has gained widespread attention. In this work, three new kinds of shape stable composite phase change materials (sscPCMs) were prepared which combined with stearic acid (SA) and peanut shell powders (PSP), poplar wood powders (PWP), and corn straw powders (CSP), respectively. The influence of lignocellulosic biomass types on the thermal energy storage performance of sscPCMs was studied by comparing three types of sscPCMs. The research results indicated that SA/CSP exhibited superior properties in terms of load capacity and thermal energy storage performance. According to leakage experiments the load capacity of SA/PSP, SA/PWP and SA/CSP was 31.67 %, 44.69 %, and 50.09 %, respectively. The phase change latent heat of SA/PSP, SA/PWP, and SA/CSP was 55.78, 84.27 and 98.47 J/g, respectively. In addition, the relationship between biomass component content and load rates was studied. The results showed that there was a positive correlation between the loading rates of SA and the ratio of holocellulose (cellulose + hemicellulose) to lignin. The results provided a promising approach for the selection of lignocellulosic biomass framework materials.