煤
材料科学
熔渣(焊接)
粘度
冶金
粉煤灰
氧化钙
矿物学
废物管理
化学
复合材料
工程类
作者
Wenju Shi,Xuemei Wu,Jin Feng Bai,Jing‐Pei Cao
出处
期刊:Energy & Fuels
[American Chemical Society]
日期:2023-11-13
卷期号:37 (23): 18456-18466
被引量:4
标识
DOI:10.1021/acs.energyfuels.3c03194
摘要
Coal ash flowability determines whether the coal ash slag can be successfully discharged from entrained flow gasifiers, to a large extent. Traditional single CaO fluxing cannot perform well enough to meet the requirement of slagging gasifiers for the flowability of coal ash with extremely high SiO 2 and Al 2 O 3 . Thus, this work reviewed the effect of Ca-bearing binary (CaO-Fe 2 O 3, CaO-Na 2 O, and CaO-MgO) fluxing on ash flowability. The effect of CaO-Fe 2 O 3 binary fluxing on ash flowability has been systemically investigated, while studies concerning CaO-Na 2 O and CaO/MgO on coal ash flowability were limited. CaO-Fe 2 O 3 binary fluxing performs well in adjusting the AFTs and viscosity behavior. The CaO/Fe 2 O 3 fluxing mass ratio of 1/1 was recommended within the compromise of AFTs and viscosity at operating temperature. CaO-Na 2 O also displayed good performance to decrease AFTs, but strong volatilization of Na species brings difficulty to quantify the influence of CaO-Na 2 O compositional fluxing. CaO-MgO compositional fluxing showed a synergistic effect at controlling both AFTs and viscosity, while the addition of CaO-MgO fluxing easily led to a crystallization slag pattern. Besides, the value of CaO/MgO corresponding to the best fluxing performance and fluidity performance was unrevealed, as well as CaO/Na 2 O. The exploration of CaO-Na 2 O and CaO/MgO in the industry needs further testimony in coal ash with bad flowability. In a comprehensive comparison, CaO/Fe 2 O 3 binary fluxing is the most promising compositional flux in adjusting the coal ash flowability. The review can give guiding information for selecting high-efficiency fluxing compositional fluxing.
科研通智能强力驱动
Strongly Powered by AbleSci AI