Synthesis of Polymer Brushes and Removable Surface Nanostructures on Tannic Acid Coatings

Polymer brushes refer to polymer chains that are end-grafted to surfaces or interfaces at high grafting density. Polymer brushes are able to make surface self-assembly or surface coassembly with free block copolymer (BCP) chains, and surface nanostructures with different morphologies are formed on the surfaces. The formation of the surface nanostructures endows materials with new surface properties. To develop a simple and versatile approach to the synthesis of polymer brushes and surface nanostructures, the synthesis of polymer brushes and surface nanostructures on tannic acid (TA) coatings was investigated in this research. TA molecules were coated on the surfaces of amino-modified silica particles (SiO2-NH2) through noncovalent bonds. Quaternized poly(2-(dimethylamino)ethyl methacrylate)-block-polystyrene (qPDMAEMA-b-PS) chains were anchored onto the TA coatings through electrostatic interaction between qPDMAEMA blocks and TA coatings, and PS brushes are formed on the particle surfaces. Thermo gravimetric analysis demonstrates the grafting of the BCP chains on the TA coatings, and the calculation results indicate that the PS chains on the silica particles are in the polymer brush regime. PS brushes on TA coatings are able to make surface coassembly with free BCP chains, and surface nanostructures with different sizes and morphologies are produced on TA coatings. The grafting density of PS blocks and BCP concentration both exert significant influences on the formation of the surface nanostructures. The surface nanostructures can be removed from the particle surfaces in the aqueous solution of sodium chloride. This research provides a simple and versatile method for the fabrication of polymer brushes and removable surface nanostructures on any solid substrates, which have specific interactions with TA molecules.