材料科学
钙钛矿(结构)
卤化物
化学工程
介孔材料
能量转换效率
甲脒
晶粒生长
粒度
晶界
钙钛矿太阳能电池
无机化学
光电子学
复合材料
有机化学
催化作用
化学
微观结构
工程类
作者
Youhei Numata,Atsushi Kogo,Yosuke Udagawa,Hideyuki Kunugita,Kazuhiro Ema,Yoshitaka Sanehira,Tsutomu Miyasaka
标识
DOI:10.1021/acsami.7b02924
摘要
We developed a new and simple solvent vapor-assisted thermal annealing (VA) procedure which can reduce grain boundaries in a perovskite film for fabricating highly efficient perovskite solar cells (PSCs). By recycling of solvent molecules evaporated from an as-prepared perovskite film as a VA vapor source, named the pot-roast VA (PR-VA) method, finely controlled and reproducible device fabrication was achieved for formamidinium (FA) and methylammonium (MA) mixed cation–halide perovskite (FAPbI 3 ) 0.85 (MAPbBr 3 ) 0.15 . The mixed perovskite was crystallized on a low-temperature prepared brookite TiO 2 mesoporous scaffold. When exposed to very dilute solvent vapor, small grains in the perovskite film gradually unified into large grains, resulting in grain boundaries which were highly reduced and improvement of photovoltaic performance in PSC. PR-VA-treated large grain perovskite absorbers exhibited stable photocurrent–voltage performance with high fill factor and suppressed hysteresis, achieving the best conversion efficiency of 18.5% for a 5 × 5 mm 2 device and 15.2% for a 1.0 × 1.0 cm 2 device.
科研通智能强力驱动
Strongly Powered by AbleSci AI