Enzymatic Stability of Alteplase Solution for Injection: Effect of Various Methods of Thawing Frozen Solutions

Objective To modify and evaluate an established chromogenic assay protocol for measuring plasminogen activator inhibitor type-1 (PAI-1) activity to measure tissue plasminogen activator (tPA) activity and compare the enzymatic activity of alteplase as a function of the conditions under which it is thawed. Methods A 50 mg vial of alteplase was reconstituted with sterile water to make a 1 mg/mL stock solution (nominal concentration). Plastic syringes were loaded with 0.5 mL of alteplase stock solution and stored at −20°C. After 8 days, samples were thawed by 3 methods – via body temperature (37°C), room temperature (20°C), or in a refrigerator (2°C). Thaw times were recorded. The thawed solutions, along with a freshly prepared alteplase solution, were assayed using the modified protocol of the Spectrolyse PAI-1 kit to determine residual tPA enzyme activity. Results Validation of the modified protocol for the Spectrolyse PAI-1 kit used to measure tPA activity produced a linear response with coefficients of determination (R 2 ) of greater than 0.9977 when assayed on 2 separate days, which corresponded to an enzymatic activity accuracy between 98.3% and 108.3%. The average percent residual tPA enzyme activity of samples from each group compared to the freshly prepared solution was 106%, 98.7%, and 91.5% for samples thawed at body temperature, room temperature, and refrigerated, respectively. Conclusion Modifications to the standard procedure for the Spectrolyse PAI-1 kit allows for accurate determination of tPA activity in aqueous based reconstituted solutions of alteplase. Under thawed conditions, alteplase retained greater than 91% enzyme activity as compared to a freshly prepared control.