Anti-fouling and self-cleaning ability of BiVO4/rGO and BiVO4/g-C3N4 visible light-driven photocatalysts modified ceramic membrane in high performance ultrafiltration of oily wastewater

Oily wastewater is one of the most harmful and resistant types of wastewater that cannot be treated with the usual and traditional methods. In this study, the visible light-driven photocatalysts BiVO4/rGO and BiVO4/g-C3N4 were made using the hydrothermal method. After that, a simple sol-gel method was used to make a photocatalytic ultrafiltration membrane with good self-cleaning and anti-fouling properties that can effectively separate oily wastewater. Photocatalyst properties were identified by using XRD, FTIR, DRS, N2 absorption-desorption, and zeta potential analysis. The performance of photocatalytic membranes was then investigated in oily wastewater treatment. Antifouling parameters, underwater oil contact angle, surface roughness, and electrochemical properties were measured to look into the membrane's antifouling properties. The use of a BiVO4/rGO composition with 20 wt% of rGO produced an underwater oil contact angle of 158°. Also, after 3 h of 3000 ppm oily wastewater filtration, the permeate flux was double that of the UF membrane without a photocatalytic coating, and the TOC removal efficiency was more than 99%. Measurement of antifouling parameters revealed that flux recovery was 89% compared to 51% for the UF membrane, and the total fouling ratio was reduced from 57% to 21%.