Visible Light-Driven H2O2 Photoelectrocatalytic Synthesis Over a Tandem Electrode Strategy

Photocatalytic synthesis of hydrogen peroxide (H2O2) can be an environmentally friendly and energy-saving solution. However, the oxygen reduction reaction (ORR) rate is limited due to the low solubility of O2 in water. In this study, a modified BiVO4 (BVO) photoanode combined with an Sn-coordinated phthalocyanine gas diffusion electrode (SnPc-GDE) was employed for the synthesis of H2O2, and the oxy-gen reduction reaction rate was increased through a unique three-phase interface system. When visible light was irradiated on the BVO photoanode, the hole-electron pairs were excited and the oxygen evolution reaction (OER) was driven through the holes, and the excited electrons were transferred to the SnPc-GDE to reduce O2 for the synthesis of H2O2. Oxygen vacancy enrichment on the BVO electrode was achieved by photoetching and annealing under an N2 atmosphere, which effectively improved the carrier separation efficiency. Complexation with a WO3 layer formed a built-in electric field, which further promoted the electron-hole pair separation. The SnPc catalyst-modified GDE electrode has the best selectivity for ORR and remains stable during long-term reactions. Under bias-free conditions, the generation rate of H2O2 reached 952.5 μM·L−1·h−1, with a Faradaic efficiency of 48.4%. This study provided a practical strategy for designing a highly efficient BVO/SnPc-GDE photoelectrochemical system to produce H2O2 based on improvement in electron-hole transmission efficiency and product selectivity.