激光器
抗压强度
冲击波
等离子体
材料科学
休克(循环)
电离
Nd:YAG激光器
强度(物理)
激光诱导击穿光谱
分析化学(期刊)
光学
复合材料
化学
离子
内科学
有机化学
航空航天工程
工程类
物理
医学
量子力学
色谱法
作者
Kenichiro Tsuyuki,Satoru Miura,Nasrullah Idris,Koo Hendrik Kurniawan,Tjung Jie Lie,Kiichiro Kagawa
标识
DOI:10.1366/000370206775382668
摘要
An experiment to investigate the potential of a laser-induced plasma method for determining concrete compressive strength was conducted by focusing a Nd:YAG laser on concrete samples with different degrees of compressive strength. This technique was developed in light of the role of the shock wave in the generation of a laser-induced plasma. It was found that the speed of the shock front depends on the hardness of the sample. It was also found that a positive relationship exists between the speed of the shock front and the ionization rate of the ablated atoms. Hence, the ratio of the intensity between the Ca(II) 396.8 nm and Ca(I) 422.6 nm emission lines detected from the laser-induced plasma can be used to examine the hardness of the material. In fact, it was observed that the ratio changes with respect to the change in the concrete compressive strength. The findings also show that the ratio increases with time after the cement is mixed with water.
科研通智能强力驱动
Strongly Powered by AbleSci AI