薄膜
材料科学
椭圆偏振法
原子层外延
分析化学(期刊)
化学计量学
基质(水族馆)
外延
图层(电子)
分子束外延
原子层沉积
化学
纳米技术
海洋学
地质学
有机化学
色谱法
作者
M. Oikkonen,T. Tuomi,M. Luomajärvi
摘要
The density of ZnS thin films is determined as a function of the film thickness. The films were prepared using atomic layer epitaxy. Two experimental techniques are used, namely, (1) spectroscopic ellipsometry combined with He-ion backscattering spectrometry and (2) spectroscopic ellipsometry alone using an effective medium approximation. Both methods give approximately the same results. In the ZnS thin films having a cubic crystal structure, the mean density increases from about 2.5 to about 4.0 g/cm3 with increasing film thickness in the thickness range of 25–400 nm. In the films thicker than 500 nm the density starts to decrease from the value 4.0 g/cm3. In the thickness range of 1000–2000 nm the density is 3.7–3.8 g/cm3. When the distance from the substrate is between 50 and 300–400 nm the local density of the cubic thin films has a maximum value which is close to the bulk density 4.1 g/cm3. The stoichiometric atomic ratio of sulfur to zinc is found to be between 0.9 and 1.0. The ratio has a tendency to increase with increasing film thickness.
科研通智能强力驱动
Strongly Powered by AbleSci AI