结构工程
弯矩
地震振动台
拱门
剪切(地质)
岩土工程
流离失所(心理学)
工程类
地质学
剪切力
断层(地质)
地震荷载
加速度
弯曲
地震模拟
刚度
地震分析
剪应力
压力(语言学)
变形(气象学)
力矩(物理)
诱发地震
拱坝
作者
Chunlei Xin,Yi Hu,Danqing Song,Xiaoli Liu,Wenkai Feng,Jianmin Zhang
标识
DOI:10.1016/j.jrmge.2025.08.043
摘要
Cross-fault tunnels are particularly vulnerable to damage during earthquakes, and aseismic joints are generally considered effective seismic mitigation measures. Two sets of shaking table model tests were designed to investigate the seismic mitigation and damage mechanisms of aseismic joints. The tests aimed to simulate the strike-slip phenomenon during earthquakes, for which a fault-crossing tunnel model capable of replicating this phenomenon was established. The dynamic response characteristics and seismic damage evolution process of the tunnel were analysed. In addition, energy-based damage identification methods via the Hilbert–Huang transform were employed to examine the dynamic response and damage process and of the lining. The experimental results revealed that inverts and arch springs are the most vulnerable areas in tunnels crossing fault zones, highlighting the need to focus seismic mitigation design on these regions. Although aseismic joints do not significantly improve the stress state at the invert and arch springs, they do reduce the local acceleration response of the lining and help prevent the development of tunnel cracks. Furthermore, both aseismic joints and damping layers are effective seismic mitigation measures. However, when used together, the lining structure requires reinforcement to ensure its seismic resistance. Finally, theoretical derivations were conducted to obtain the longitudinal distribution formulae for the bending moment and shear force of the flexible lining with aseismic joints under seismic loads. These derivations show that aseismic joints enable the lining to adapt to rock movement, increase the displacement capacity during fault slip, and reduce the bending moments and shear forces.
科研通智能强力驱动
Strongly Powered by AbleSci AI