阴极
相间
材料科学
电解质
电化学
化学工程
纳米复合材料
重量分析
锂(药物)
涂层
硒
溶解
复合数
电极
纳米颗粒
硫化物
磷酸铁锂
无机化学
电化学窗口
硫黄
电导率
电化学电池
纳米技术
作者
Hyeonji Jang,Jung Tae Lee
出处
期刊:Micromachines
[Multidisciplinary Digital Publishing Institute]
日期:2026-11-12
卷期号:17 (11): 1313-1313
摘要
Selenium sulfide (SeS2) is an attractive next-generation cathode material because it combines the high gravimetric capacity of sulfur (S) with the high electronic conductivity of selenium (Se). However, like its parent S and Se cathodes, SeS2 undergoes severe polychalcogenide dissolution during electrochemical cycling, leading to fast capacity fade. While protective interphase layers can stabilize SeS2 cathodes, conventional coating methods require complex synthesis, limiting practical implementation. Here, we report a facile electrochemical approach to engineer protective interphases on SeS2/carbon composite cathodes by simply using a fluoroethylene carbonate (FEC)-containing electrolyte. During the initial formation cycle, FEC is preferentially reduced, in situ forming cathode electrolyte interphase (CEI) and solid electrolyte interphase (SEI) layers on the SeS2/C cathode and Li anode, respectively. These dual protective interphase layers effectively suppress polychalcogenide dissolution, enable rapid Li-ion conduction, and provide mechanical and chemical stability. Consequently, the FEC-assisted SeS2/C cathode retains over 98.5% of its initial capacity after 400 cycles at C/5, significantly outperforming the unprotected cathode, which suffers rapid capacity decay within 100 cycles. This work shows that electrolyte engineering via in situ electrochemical protective-layer formation offers a practical, effective strategy for stabilizing conversion-type cathodes.
科研通智能强力驱动
Strongly Powered by AbleSci AI