材料科学
表征(材料科学)
光电子学
微波食品加热
组分(热力学)
噪音(视频)
功率(物理)
联轴节(管道)
电气工程
导电体
作者
Mahin Ahamed,Lakshmi Narasimha Vijay Kumar,Madhavan Swaminathan,Habib Hichri,Yoshio Nishimura,Takashi Yamanaka,Yuko Shibata
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2026-05-26
卷期号:: 2352-2358
标识
DOI:10.1109/ectc51846.2026.00389
摘要
Automotive radar and other sensing applications are driving interconnect operation into the sub-terahertz frequency regime, particularly across the G-band (100–300 GHz) and beyond, where dielectric materials experience increased frequency-dependent attenuation and temperature-induced electrical variation. This work presents the first temperature-dependent electrical characterization of Ajinomoto Build-up Film® (ABF) Type-A dielectric material from 10 to 220 GHz. Dielectric properties at elevated temperatures (80°C and 115°C) are extracted using the microstrip ring resonator (MRR) method. In addition, microstrip transmission lines fabricated on 30 µm-thick ABF Type-A using a semi-additive patterning (SAP) process were used to evaluate insertion loss behavior. Results show that the dielectric constant (Dk) increases with both frequency and temperature. At 80°C, the extracted dielectric constant (Dk) increases from 3.412 at 16.5 GHz to 3.491 at 216 GHz, while at 115°C it varies from 3.419 to 3.532 over the same frequency range. The loss tangent (Df) reaches 0.0091 at 80 °C and 0.0101 at 115 °C at 216 GHz. Consistent with these material trends, microstrip lines exhibit maximum average insertion loss of 0.519 dB/mm at 80°C and 0.596 dB/mm at 115°C at 200 GHz. These results demonstrate stable dielectric performance under elevated temperature conditions and confirm the suitability of ABF Type-A for high-frequency, multi-layer chip embedding and glass-based antenna-in-package architectures intended for next-generation sensing and communication platforms.
科研通智能强力驱动
Strongly Powered by AbleSci AI